ATV / UTV Track System Maintenance &  Storage Tips

Spring is here, which means it’s time for many of us to replace our ATV or UTV’s track system with tires. Elements such as mud, dust, water and humidity can alter and corrode the moving parts of your track system during storage, so now is the perfect time to carry out season change maintenance of your Camso track system. Here’s how:

1. Remove each track system

Carefully group and label all components to avoid confusion. Remove the plates first, then the wheel nuts and finally, the rest of the system.

  • CAMSO PRO TIP: Always remove all track system anti-rotation brackets and their components before reinstalling the wheels. Leaving the brackets attached to the suspension arms could cause interference and potentially damage the vehicle.

Camso UTV4S1 Storage & Maintenance Tips

Using your track system year-round?
See your owner’s manual for recommendations on track tension and bearings.
Find your owner’s manual online >

2. Clean each track system

Gently remove all dirt and debris using a biodegradable degreaser and gentle spray of water. If using a pressure washer, work with extreme care because the spray can damage rolling components.

  • CAMSO PRO TIP: Avoid using a brake cleaning solvent, which can damage sealing components and stickers.

How to Clean Camso UTV Track System

Time for a new track system?
Explore Camso’s ATV & side-by-side track systems to discover the latest technologies
View New Products >

3. Inspect all parts

Look for any signs of damage, wear or cracks. This includes the track, the tie rod, wheels, and all bearings.

  • CAMSO PRO TIP: Identify the parts to replace and make a list of any damaged or worn-out components and order them now. That way, you’ll be ready for those first track days on your next adventure.

Camso UTV4S1 Track Inspection

4. Adjust all components

Refer to your owner’s manual and installation guidelines for instructions for your specific track system.

See more track system maintenance & driving tips
Find your owner’s manual and installation guidelines online >

5. Lubricate rolling parts

Clean the old lubricant and apply a new coat on rolling parts.

  • CAMSO PRO TIP: Pour 5 teaspoons of oil under the wheel caps and between the bearings to extend wheel life.

Camso UTV4S1 Wheel Bearing Lubrication

6. Store systems horizontally

Store your track systems on their side so that gravity can better disperse the lubricant. This will also prevent water from accumulating in the bearings and other parts so that they don’t rust and potentially fail.

Camso ATV & UTV Track Systems Storage

Have more Questions? Submit your Camso ATV & UTV Track System Questions on our Contact Us page

Camso Maintenance & Storage Tips